Summary Report for:
51-2011.00 - Aircraft Structure, Surfaces, Rigging, and Systems Assemblers
Assemble, fit, fasten, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
Sample of reported job titles:
Sheet Metal Assembler and Riveter (SMAR), Structures Technician, Helicopter Mechanic, Aircraft Line Assembler, Assembly Riveter, Helicopter Technician, Line Assembler, Structures Mechanic
Tasks | Tools & Technology | Knowledge | Skills | Abilities | Work Activities | Work Context | Job Zone | Interests | Work Styles | Work Values | Related Occupations | Wages & Employment
Tasks
- Align and fit structural assemblies manually, or signal crane operators to position assemblies for joining.
- Assemble and fit prefabricated parts to form subassemblies.
- Assemble, install, and connect parts, fittings, and assemblies on aircraft, using layout tools, hand tools, power tools, and fasteners such as bolts, screws, rivets, and clamps.
- Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points.
- Cut, trim, file, bend, and smooth parts, and verify sizes and fitting tolerances in order to ensure proper fit and clearance of parts.
- Read and interpret blueprints, illustrations, and specifications to determine layouts, sequences of operations, or identities and relationships of parts.
- Align, fit, assemble, connect, and install system components, using jigs, fixtures, measuring instruments, hand tools, and power tools.
- Join structural assemblies such as wings, tails, and fuselage.
- Lay out and mark reference points and locations for installation of parts and components, using jigs, templates, and measuring and marking instruments.
- Adjust, repair, rework, or replace parts and assemblies to eliminate malfunctions and to ensure proper operation.
back to top
Tools & Technology
Tools used in this occupation:
| Guide jig — Material guiding jigs; Trunnion centering tools |
| Rivet tools — Alligator jaw compression riveters; C-yoke compression riveters; Metal bucking bars; Recoilless rivet hammers |
| Specialty wrenches — Case wrenches; Flange wrenches; Input wrenches; Spline wrenches |
| Templates — Drafting templates; Mylar index templates; Setup templates |
| Torque wrenches — Fuel control wrenches; Torque drivers; Trunnion wrenches |
Technology used in this occupation:
| Computer aided design CAD software |
| Data base user interface and query software — Data entry software |
| Industrial control software — Electrical power management system software |
| Spreadsheet software |
| Word processing software |
back to top
Knowledge
| Mechanical — Knowledge of machines and tools, including their designs, uses, repair, and maintenance. |
| English Language — Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. |
back to top
Skills
| Installation — Installing equipment, machines, wiring, or programs to meet specifications. |
| Mathematics — Using mathematics to solve problems. |
| Equipment Selection — Determining the kind of tools and equipment needed to do a job. |
| Critical Thinking — Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. |
| Coordination — Adjusting actions in relation to others' actions. |
| Reading Comprehension — Understanding written sentences and paragraphs in work related documents. |
| Active Listening — Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. |
| Equipment Maintenance — Performing routine maintenance on equipment and determining when and what kind of maintenance is needed. |
| Learning Strategies — Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things. |
| Quality Control Analysis — Conducting tests and inspections of products, services, or processes to evaluate quality or performance. |
back to top
Abilities
| Problem Sensitivity — The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. |
| Finger Dexterity — The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects. |
| Manual Dexterity — The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects. |
| Near Vision — The ability to see details at close range (within a few feet of the observer). |
| Far Vision — The ability to see details at a distance. |
| Information Ordering — The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations). |
| Visualization — The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged. |
| Arm-Hand Steadiness — The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position. |
| Control Precision — The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions. |
| Deductive Reasoning — The ability to apply general rules to specific problems to produce answers that make sense. |
back to top
Work Activities
| Inspecting Equipment, Structures, or Material — Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects. |
| Getting Information — Observing, receiving, and otherwise obtaining information from all relevant sources. |
| Evaluating Information to Determine Compliance with Standards — Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards. |
| Making Decisions and Solving Problems — Analyzing information and evaluating results to choose the best solution and solve problems. |
| Updating and Using Relevant Knowledge — Keeping up-to-date technically and applying new knowledge to your job. |
| Identifying Objects, Actions, and Events — Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events. |
| Documenting/Recording Information — Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form. |
| Monitor Processes, Materials, or Surroundings — Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems. |
| Handling and Moving Objects — Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. |
| Analyzing Data or Information — Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts. |
back to top
Work Context
| Spend Time Using Your Hands to Handle, Control, or Feel Objects, Tools, or Controls — How much does this job require using your hands to handle, control, or feel objects, tools or controls? |
| Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats, or Life Jackets — How much does this job require wearing common protective or safety equipment such as safety shoes, glasses, gloves, hard hats or life jackets? |
| Importance of Being Exact or Accurate — How important is being very exact or highly accurate in performing this job? |
| Sounds, Noise Levels Are Distracting or Uncomfortable — How often does this job require working exposed to sounds and noise levels that are distracting or uncomfortable? |
| Exposed to Contaminants — How often does this job require working exposed to contaminants (such as pollutants, gases, dust or odors)? |
| Exposed to Hazardous Equipment — How often does this job require exposure to hazardous equipment? |
| Time Pressure — How often does this job require the worker to meet strict deadlines? |
| Face-to-Face Discussions — How often do you have to have face-to-face discussions with individuals or teams in this job? |
| Indoors, Not Environmentally Controlled — How often does this job require working indoors in non-controlled environmental conditions (e.g., warehouse without heat)? |
| Freedom to Make Decisions — How much decision making freedom, without supervision, does the job offer? |
back to top
Job Zone
| Title |
Job Zone Two: Some Preparation Needed |
| Overall Experience |
Some previous work-related skill, knowledge, or experience may be helpful in these occupations, but usually is not needed. For example, a teller might benefit from experience working directly with the public, but an inexperienced person could still learn to be a teller with little difficulty. |
| Job Training |
Employees in these occupations need anywhere from a few months to one year of working with experienced employees. |
| Job Zone Examples |
These occupations often involve using your knowledge and skills to help others. Examples include sheet metal workers, forest fire fighters, customer service representatives, pharmacy technicians, salespersons (retail), and tellers. |
| SVP Range |
(4.0 to < 6.0) |
| Education |
These occupations usually require a high school diploma and may require some vocational training or job-related course work. In some cases, an associate's or bachelor's degree could be needed. |
There are 5 recognized apprenticeable specialties associated with this occupation:
Precision Assembler; Aircraft Mechanic, Armament (Aircraft Manufacturing); Aircraft Mechanic, Plumbing and Hydraulics; Assembler, Aircraft, Structures and Surfaces; Assembler-Installer, General
To learn about specific apprenticeship opportunities, please consult the U.S. Department of Labor State Apprenticeship Information
website.
For general information about apprenticeships, training, and partnerships with
business, visit the U.S. Department of Labor Office of Apprenticeship
website.
back to top
Interests
Interest code: RC
| Realistic — Realistic occupations frequently involve work activities that include practical, hands-on problems and solutions. They often deal with plants, animals, and real-world materials like wood, tools, and machinery. Many of the occupations require working outside, and do not involve a lot of paperwork or working closely with others. |
| Conventional — Conventional occupations frequently involve following set procedures and routines. These occupations can include working with data and details more than with ideas. Usually there is a clear line of authority to follow. |
back to top
Work Styles
| Attention to Detail — Job requires being careful about detail and thorough in completing work tasks. |
| Dependability — Job requires being reliable, responsible, and dependable, and fulfilling obligations. |
| Integrity — Job requires being honest and ethical. |
| Cooperation — Job requires being pleasant with others on the job and displaying a good-natured, cooperative attitude. |
| Adaptability/Flexibility — Job requires being open to change (positive or negative) and to considerable variety in the workplace. |
| Achievement/Effort — Job requires establishing and maintaining personally challenging achievement goals and exerting effort toward mastering tasks. |
| Independence — Job requires developing one's own ways of doing things, guiding oneself with little or no supervision, and depending on oneself to get things done. |
| Self Control — Job requires maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior, even in very difficult situations. |
| Initiative — Job requires a willingness to take on responsibilities and challenges. |
| Persistence — Job requires persistence in the face of obstacles. |
back to top
Work Values
| Support — Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical. |
| Relationships — Occupations that satisfy this work value allow employees to provide service to others and work with co-workers in a friendly non-competitive environment. Corresponding needs are Co-workers, Moral Values and Social Service. |
| Working Conditions — Occupations that satisfy this work value offer job security and good working conditions. Corresponding needs are Activity, Compensation, Independence, Security, Variety and Working Conditions. |
back to top
Related Occupations
back to top
Wages & Employment Trends
National
| Median wages (2007) |
$21.84 hourly, $45,420 annual |
| Employment (2006) |
28,000 employees |
| Projected growth (2006-2016) |
Average (7% to 13%)
|
| Projected need (2006-2016) |
9,000 additional employees |
State & National
Source: Bureau of Labor Statistics 2007 wage data
and 2006-2016 employment projections
.
"Projected growth" represents the estimated change in total employment over the projections period (2006-2016). "Projected need" represents job openings due to growth and net replacement.
back to top
